Avaya one-X Deskphone Edition Page 15 Installation And Maintenance Manual Download | Manualshive

Page: 15 / 74

background image

Converting Software on 9600 Series IP Telephones

Issue 2 December 2007

15

●

SIP-Centric

- an environment where the majority of IP telephones are or will become SIP

telephones running SIP software. In a SIP-centric environment, the

96xxSIP...

software

bundle must reside on the HTTP server and both SES and CM must be configured with the
appropriate SIP parameters. To convert an individual telephone from SIP to H.323, Avaya
Communication Manager (CM) must be configured with the appropriate H.323
parameters. Any SIP telephone in use prior to conversion must run Release SIP 1.0 or
greater software with a SIG parameter value of “default” (SIP). See

Table 1

, the

H.323 to

SIP and SIP to H.323 Conversion Chart

for conversion instructions.

What makes an environment H.323- or SIP-centric depends on the type of upgrade script files
the environment is running (H.323 or SIP, see

Downloading Software Upgrades

on page 47)

and the Signaling Protocol Identifier (SIG) parameter setting. The SIG parameter has three
possible values:

●

Default - either H.323 or SIP, set automatically for all telephones depending on whether
your environment is H.323-centric or SIP-centric as determined by the software bundle
downloaded and the changes you make to the

alternate_96xxupgrade.txt

file.

●

H.323 - manually set to H.323 for a specific telephone by an installer or administrator
according to the procedures in this section.

●

SIP - manually set to SIP for a specific telephone by an installer or administrator according
to the procedures in this section.

Converting 9600 Series IP Telephones

An H.323 IP telephone can be either in use with possible customized settings or out of the box
with factory default settings. An out of the box telephone you want to convert to SIP requires
accessing the SIG Craft procedures early in the power up and initialization process and setting
the Signaling Protocol Identifier (SIG) parameter for that telephone to “SIP.” Converting to SIP
early avoids having to first load H.323 software, log in, and then invoke the “in use” process to
load the SIP software.

Note:

Note:

For information about the SIG parameter, see “Choosing the Right Application
File and Upgrade Script File” in the

Avaya one-X™ Deskphone Edition for 9600

Series SIP IP Telephones Administrator Guide

. For information on setting or

changing the SIG parameter, see

Signaling Protocol Identifier

on page 40.

«
...
13
14
15
16
17
...
»

Summary of Contents for one-X Deskphone Edition











































































Reviews:

No comments

Related manuals for one-X Deskphone Edition

010-10307-00 - MapSource Fishing Hot Spots

Brand: Garmin Pages: 30

Brand: Quantum Pages: 91

RS232 interface for GT47 embedded apps UART

Brand: Sony Ericsson Pages: 14

Remote Client Software V 4.0.1

Brand: Q-See Pages: 72

Brand: Barco Pages: 22

ANTI-VIRUS BUSINESS OPTIMAL

Brand: KAPERSKY Pages: 31

Brand: Adobe Pages: 306

Certificate Management System 6.2

Brand: Netscape Pages: 874

Brand: BrainMaster Pages: 14

Brand: Qlogic Pages: 180

Brand: Allied Telesis Pages: 668

Mentor Time-Server

Brand: Sonifex Pages: 4

Application Accelerator RAID Edition

Brand: Intel Pages: 85

Formidable mOByDic 3210 Series

Brand: Fiat Pages: 17

Brand: UMAX Technologies Pages: 127

Brand: FieldServer Pages: 26

VAIO VGN-TXN15P/B

Brand: Sony Pages: 172

Rampage IV Extreme

Brand: Asus Pages: 179

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands