manualshive.com logo in svg

Avaya one-X 9600 Series, Setup Manual, Page: 41 / 65

Share
Download
Avaya one-X 9600 Series Setup Manual Download Page 41

Phone certificate invalid

Problem description

The VPN gateway has rejected the digital certificate presented by the phone.

Resolution

Procedure

Use SCEP to provision a new digital certificate in the phone.

IKE Phase 1 No Response

Problem description

A message was not received from the VPN gateway in response to a message sent by the phone.

Another cause might be that a Phase 1 parameter is not set correctly, causing the VPN gateway to

ignore the message from the phone.

Resolution

About this task

Either the VPN gateway is experiencing difficulties, or network congestion is interfering with

communication.

Procedure

If that is not the cause, check the following IKE Phase 1 parameters for compatibility:

• NVVPNSVENDOR

• NVVPNAUTHTYPE

• NVIKEDHGRP

• NVIKEP1AUTHALG

• NVIKEP1ENCALG

• NVIKEP1LIFESEC

Phone certificate invalid

March 2015

VPN Setup Guide for 9600 Series IP Telephones     

41

Comments? [email protected]

Summary of Contents for one-X 9600 Series


































































Reviews:

No comments