Avaya one-X 9600 Series Setup Manual Download

Page: 30 / 65

IKE PSK screen

Use this screen to view or change two IKE values, the IKE ID (or Group Name) and the Pre-Shared
Key (PSK).

Procedure

1. Press Change on either line to display the VPN Text Entry Screen.

2. Enter or change the IKE ID value or PSK value.

3. Press or touch

Save

4. Press the

RIght Arrow

to save the new or changed value(s).

The IKE Phase 1 screen opens.

IKE Phase 1 screen field descriptions

Line/Field

Description

Associated system parameter

IKE ID Type

The following descriptions display,
depending on the value of the
NVIKEIDTYPE parameter:

• If the IKE ID Type is 1,

"IPV4_ADDR" displays.

• If the IKE ID Type is 2, "FQDN"

displays.

• If the IKE ID Type is 3

"USER_FQDN" displays.

• If the IKE ID Type is 9,

"DER_ASN1_DN" displays.

• If the IKE ID Type is 11,

"KEY_ID" displays.

NVIKEIDTYPE

IKE Xchg Mode

Aggressive Mode ("1") or ID
Protect ("2").

NVIKEXCHGMODE

IKE DH Group

1 denotes First Oakley Group

2 denotes Second Oakley Group

5 denotes 1536-bit MODP Group

14 denotes 2048-bit MODP Group

15 denotes 3072-bit MODP Group

NVIKEDHGRP

IKE Encryption Algorithm

0 = Any

NVIKEP1ENCALG

Table continues…

Changing VPN settings

VPN Setup Guide for 9600 Series IP Telephones

March 2015

Comments? [email protected]

Summary of Contents for one-X 9600 Series


































































Search results

Summary of Contents for one-X 9600 Series

Reviews:

Related manuals for one-X 9600 Series

Brands by name

Popular brands

Avaya one-X 9600 Series, Setup Manual

Search results

Summary of Contents for one-X 9600 Series

Reviews:

Related manuals for one-X 9600 Series

Brands by name

Popular brands