M7100 Digital Deskphone layout
This section describes the location and function of the buttons and
other features on the face of the M7100 Digital Deskphone.
M7100 layout
A
Release button
Ends an active call or
feature.
B
Display
Shows time and date,
call, and feature
information.
C
Memory button
Can be programmed with
an internal or external
telephone number or
frequently accessed
feature.
D
Dial pad
Used to dial out and
access features.
E
Feature button
Starts or ends a feature.
F
Volume control
Adjusts ringer and
handset volume.
G
Hold button
Places an active call on
hold.
Telephone Setup
Use the following tasks to set up the M7100 Digital Deskphone.
Adjusting the contrast level
Use the following task to adjust the contrast level of the LCD display.
1.
Press
Feature * 7
.
2.
Press
1
through
9
to select the contrast level. The higher the
number, the higher the contrast level.
Changing the ring type
Use the following task to change the ring type on the telephone.
1.
Press
Feature * 6
.
2.
Press
1
through
4
to select the ring type. A preview tone is
played.
3.
Press
Feature
to store the ring type.
Programming the memory button
The memory button stores an autodial number or feature code to
give you one touch dialing or feature activation. You can program
the memory button with a new number or feature. After you have
programmed the memory button, you can use one of the included
memory button label strips to label the memory button.
Programming an external autodial number
You can program an external autodial number to the memory button.
1.
Press
Feature * 1
.
2.
Dial the external number you want to save to the memory button.
3.
Press
Hold
to store the number to the telephone memory.
4.
Label the memory button with a button label strip.
Programming an internal autodial number
You can program an internal autodial number to the memory button.
1.
Press
Feature * 2
.
2.
Dial the extension you want to save to the memory button. If a
valid number is entered, it is stored automatically.
3.
Label the memory button with a button label strip.
Programming a feature code — method 1
You can program a feature code to the memory button.
Feature
IP Office
Standard
Version
IP Office Quick Version/
PARTNER Version/Norstar
Version
Personal
Speed Dial
Feature 0,
*00 to *99
#80 to #99 (also Feature *4,
80 to 99).
System
Speed Dial
Feature 0,
001 to 999
Feature 0, 600 to 699
Ring Again
(Set/Clear)
Feature 2 /
Feature #2
AutCB works on phones with
soft keys.
Conference Feature 3
Feature 3
Forward All
On/Off
Feature 4 /
Feature #4
Feature 4 / Feature #4
Last Number
Redial
Feature 5
Feature 5
Page
Feature 60
Prefix * to the extension/
group number.
Retrieve
Messages
Feature 65
or Feature
981
777 (own mailbox) or 778
(mailbox select)
Dial Voice
Call
Feature 66
Prefix * to the extension/
group number.
Priority Call Feature 69
Not supported
Transfer
Feature 70
Feature 70
Call Park
Feature 74
Transfer call to own
extension number.
Call Unpark Feature #74
<park slot
ID>
6<extension number
(whoever parked the call)>
Call Pickup
Group
Feature 75
66<pickup group number>
Direct Call
Pickup
Feature 76
6<extension number>
M7100 Digital Deskphone
for IP Office Quick
Reference Guide
