Depending on the current value, the next sequential text string is selected and displayed
as the setting. For example, if the current value is SIP (2), pressing the Right arrow
changes the value to 0 (default). If the current value is H.323 (1), pressing the Right arrow
changes the value to 2 (SIP).
3. Press
Save
to store the new setting and redisplay the Craft Procedures screen.
The remainder of this procedure depends on the status of the boot and application files.
Changing SSON settings
About this task
Caution:
Do not perform this procedure if you are using static addressing. Perform this procedure only
if you are using DHCP and the LAN administrator instructs you to do this.
Use the following procedure to set the Site-Specific Option Number (SSON).
Procedure
1. Select SSON from the Craft Procedures screen.
The phone displays the following text:
Current setting:
New Setting:
where the
setting
is the current system value of NVSSON.
2. To change the setting, use the dial pad to enter a valid SSON value between 128 and 255.
3. Press
Save
to store the new setting and redisplay the Craft Procedures screen.
Performing a self-test
About this task
Note:
IP deskphone stores two software code images in reprogrammable non-volatile memory. The
primary image, called the “big app” must be running to perform a self-test. The backup image,
called the “little app” does not support the self-test.
Use the following procedure to perform self-testing:
Procedure
1. Tap or select
TEST
from the Craft Procedures screen. The phone displays the following
text:
Press Test to confirm.
Using local Administrative Menu procedures
May 2018
Installing and Administering Avaya J169/J179 IP Phone H.323
45
