Running Craft procedures
Procedure
1. Press
*
to display the Craft Access Code Entry screen during deskphone startup and start
local procedures.
Enter code:__
# = OK
2. Enter the local dialpad procedure password that can be composed of any numeric digits fro
zero to seven, as specified by the system administrator in the system value PROCPSWD.
For security purposes, the deskphone displays a star (*) for each numeric dialpad press.
You can use the left arrow button or the designated softkey for non-touch screen phones.
3. Press
#
when the password entry is complete.
The entry is compared to the PROCPSWD value. If they match, the deskphone displays
the Craft Local Procedure screen, and the message Select procedure and press Start.
4. For all IP phones, use the navigation arrows to scroll to and highlight the local procedure
you want, then press
Start
or
OK
.
You can also scroll to the procedure you want and press the corresponding line button.
Accessing the Administration menu after phone startup
About this task
The administration menu in the phone can only be accessed by craft menu.
Procedure
To access the craft menu, press # followed by craft access code (PROCPASSWD).
Entering data for administrative options
About this task
This section applies to all IP deskphones and describes how to enter data for administrative
options.
Procedure
1. The first application line on any screen is automatically highlighted selected when the
phone displays the screen. To select an item, press one of the following softkey.
•
Change
•
Save
Using local Administrative Menu procedures
May 2018
Installing and Administering Avaya J169/J179 IP Phone H.323
31
