Avaya J169 Installing And Administering Download

Page: 14 / 203

No.

Name

Description

• The minus key (

): To decrease the volume.

Mute Button

Used to mute and unmute the outgoing audio.

Application keys provide direct access to the corresponding applications.

No.

Application keys

Description

Phone key

Displays the phone screen.

Main Menu

Displays a list of options:

• Options & Settings

• Network Information

• VPN Settings

• Browser

• Log Out

• About Avaya IP Deskphone

Contacts

Displays the entries in your contact list.

Recents

Displays the list of calls in Call history.

Connection Jacks

The following image illustrates the connection jacks that are present on the back panel of Avaya

J169/J179 IP Phone.

The image schematically describes which device to connect to which jack.

Avaya J169/J179 phone overview

May 2018

Installing and Administering Avaya J169/J179 IP Phone H.323

Comments on this document? [email protected]

Summary of Contents for J169












































































































































































































Search results

Summary of Contents for J169

Reviews:

Related manuals for J169

Brands by name

Popular brands

Avaya J169, Installing And Administering

Search results

Summary of Contents for J169

Reviews:

Related manuals for J169

Brands by name

Popular brands