Avaya J159 Page 98 User Manual Download

Page: 98 / 149

SLA Mon

™

SLA Mon

™

technology is a patented Avaya technology embedded in Avaya products to facilitate

advanced diagnostics. The phones support SLA Mon

™

agent which works with Avaya Diagnostic

Server (ADS).

SLA Mon

™

server controls the SLA Mon

™

agents to execute advanced diagnostic functions, such

as:

• Endpoint diagnostics

- To remotely control IP phones to assist end users with IP phone configuration and

troubleshooting.

- To remotely generate single and bulk test calls between IP phones.
- To remotely execute limited packet captures on IP phones to troubleshoot and diagnose IP

phone network traffic.

• Network monitoring

- To monitor multiple network segments for performance in terms of packet loss, jitter, and

delay.

- To monitor hop-by-hop QoS markings for voice and video traffic.

Using a Guest Login

About this task

Use this procedure to log in as a guest on another phone to access your applications and call

history for a limited time.

Note:

You need to re-login if the phone reboots.

Before you begin

Ensure that the feature is activated by the administrator. Contact your administrator for details.

Procedure

1. Press

Main menu

2. Scroll to

Applications

, and press

Select

3. Scroll to

Guest login

, and press

Select

4. Enter your extension and password.

5. Press one of the following to set the duration in hours:

•

Right

arrow key: To increase the value.

•

Left

arrow key: To decrease the value.

Advanced features

April 2020

Using Avaya J159 IP Phone in an Open SIP environment

Comments on this document? [email protected]

Summary of Contents for J159






















































































































































Search results

Summary of Contents for J159

Reviews:

Related manuals for J159

Brands by name

Popular brands

Avaya J159, User Manual

Search results

Summary of Contents for J159

Reviews:

Related manuals for J159

Brands by name

Popular brands