manualshive.com logo in svg

Avaya J139, Using Manual, Page: 80 / 143

Share
Download
Avaya J139 Using Manual Download Page 80

The first call is placed on hold.

2. Do one of the following and then press the 

Call

 soft key :

• Dial the number to transfer the call.

• Search for the number in Contacts or Recents.

3. To initiate a consultative transfer, press 

Talk

.

The call transfer recipient’s phone starts ringing.

4. Do one of the following:

• Press 

Complete

 after the recipient answers the call.

The call transfer is complete. This is also called attended transfer.

• Press 

Complete

 after the recipient’s number starts ringing.

The call transfer is complete. This is also called unattended transfer.

Making a blind transfer

About this task

Use this procedure to transfer an active call without connecting a call with the transfer recipient.

Procedure

1. While on an active call, press 

Transfer

.

The phone displays the Enter Transfer Destination screen.

2. Do one of the following and then press the 

Call

 soft key:

• Dial the number to which you want to transfer the call.

• Search for the number in the Contacts or Recents list.

3. To initiate a blind transfer, press 

Now

.

The call transfer is complete.

Call Waiting

With the Call Waiting feature, you can get a notification about another incoming call even when

you are on a call. If this feature is enabled, the caller is put on waiting instead of hearing a busy

tone.

The phone displays incoming call screen, plays incoming call ringtone, and the beacon LED

flashes.

Advanced features

December 2021

Using Avaya J139 SIP IP Phone in Open SIP

80

Comments on this document? [email protected]

Summary of Contents for J139
















































































































































Reviews:

No comments