Avaya J139 Using Manual Download Page 62

Page: 62 / 143

Chapter 13: Advanced features

You can access advanced features available on your phone from the Features screen and some
advanced features from the Applications screen.

Most of the features are configured by the system administrator.

The LED next to the feature name indicates whether the feature is currently on or off.

LED state

Feature Status

Green

Red

Off

Accessing the Features screen

About this task

Use this procedure to gain access to the Features screen.

Procedure

1. Press

Main menu

, and scroll to

Features

2. Press

Select

3. Scroll to see the features that are configured for your extension.

Activating and deactivating Do not disturb

About this task

Use this procedure to prevent the phone from ringing when you get a call. When the Do not

disturb (DND) feature is activated, all incoming calls are sent directly to the voice mail, and the

caller hears a busy tone.

Before you begin

Ensure that the system administrator activates the Do not disturb feature for your extension.

December 2021

Using Avaya J139 SIP IP Phone in Open SIP

Comments on this document? [email protected]

Summary of Contents for J139
















































































































































Search results

Summary of Contents for J139

Reviews:

Related manuals for J139

Brands by name

Popular brands

Avaya J139, Using Manual

Search results

Summary of Contents for J139

Reviews:

Related manuals for J139

Brands by name

Popular brands