Avaya J139 Using Manual Download Page 35

Page: 35 / 143

Emergency call

Emergency calling is used to connect to a preset emergency services number. The emergency
service number is configured by the administrator.

You can make an emergency call from the following screens:

• Login screen

• Phone screen

• Lock screen

If your system administrator configures emergency calling for your phone, the Phone screen
displays the

Emerg

soft key.

Using the

Emerg

soft key, you can dial only the number that is given the highest priority by the

system administrator. Alternatively, you can dial the emergency numbers by using the dial pad in
the following cases:

• The

Emerg

soft key is unavailable.

• The

Emerg

soft key is available, but you want to dial an emergency number that is not set by

the system administrator.

For more information on IP Office, see IP Office documents in

https://support.avaya.com/

Making an emergency call

Before you begin

Ensure that the

Emerg

soft key is assigned by your administrator.

Procedure

Do one of the following:

• On the Phone screen, press the

Emerg

soft key, and again press

Emerg

when the phone

prompts you for confirmation.

• Dial the emergency number by using the dial pad.

Emergency call

December 2021

Using Avaya J139 SIP IP Phone in Open SIP

Comments on this document? [email protected]

Summary of Contents for J139
















































































































































Search results

Summary of Contents for J139

Reviews:

Related manuals for J139

Brands by name

Popular brands

Avaya J139, Using Manual

Search results

Summary of Contents for J139

Reviews:

Related manuals for J139

Brands by name

Popular brands