The phone updates the speed dial entries.
8. Press one of the following:
•
Replace
: To assign a contact to an assigned entry.
•
Clear
: To remove a contact from the entry.
9. Press
Save
.
Setting Mute alert
About this task
Use this procedure to receive a notification alert when your phone is on mute and you try to
answer a call.
Before you begin
Ensure that the feature is activated by the administrator. Contact your administrator for details.
Procedure
1. Press the
Main menu
.
2. Scroll to
Settings
and press
Select
.
3. Scroll to
Phone
and press
Select
.
4. Scroll to
Mute alerting
option.
5. Press
Toggle
to select one of the following:
•
Audible
: The phone beeps to notify that you have muted your phone.
•
Visual
: The phone displays the mute icon after some time on the phone status line.
•
Both
: The phone beeps and displays a mute alert message.
•
None
: The phone disables the mute alert.
6. Press
Save
.
Visual alerting
The beacon LED works in the following manner to indicate incoming calls and messages:
• If there is an incoming call, the beacon LED blinks.
• If there are new voice mail messages, the beacon LED is lit continuously.
• If the speaker is on during an active call and there are new voice mail messages, the beacon
LED turns off every 15 seconds.
• If the call is on hold, the beacon LED stops flashing.
Customization
December 2021
Using Avaya J139 SIP IP Phone in Open SIP
108