Avaya J139 Using Manual Download Page 103

Page: 103 / 143

Disabling Simultaneous Ring Personal during an active
call

About this task

Use this procedure to turn off Simultaneous Ring Personal when you are on an active call.

Procedure

1. On the phone, go to

Main menu

Features

Simultaneous ringing

Config

2. On the Simultaneous ringing page, scroll to

Do not ring with active call

3. Press

Toggle

to disable or enable the setting.

The changes will be saved automatically.

Related links

Simultaneous Ring Personal

on page 102

Adding a Simultaneous Ring number

About this task

Use this procedure to add a number or a SIP-URI address for a simultaneous ring.

Important:

You can add maximum 10 numbers or SIP-URI addresses.

Procedure

1. On the phone, go to

Main menu

Features

Simultaneous ringing

Config

2. On the Simultaneous ringing page, scroll to

Numbers

, and press

Select

3. Press

Add

4. In the Add number window, scroll to the

Phone number or SIP-URI

field, and enter the

number digits or a SIP-URI address:

• Press

Abc

abc

ABC

123

to enter letters or numbers.

• Press

Backspace

to delete the symbols entered.

(Optional)

Scroll to the

Answer confirmation required

, and press

Toggle

to toggle the

setting to on or off.

6. Press

Save

Related links

Simultaneous Ring Personal

on page 102

Disabling Simultaneous Ring Personal during an active call

December 2021

Using Avaya J139 SIP IP Phone in Open SIP

103

Comments on this document? [email protected]

Summary of Contents for J139
















































































































































Search results

Summary of Contents for J139

Reviews:

Related manuals for J139

Brands by name

Popular brands

Avaya J139, Using Manual

Search results

Summary of Contents for J139

Reviews:

Related manuals for J139

Brands by name

Popular brands