Procedure
1. In your browser, enter the IP address of the phone, and press
Enter
.
2. On the Login page, enter the username and the password in the corresponding fields.
For more information about changing the default password, see
on page 97.
3. Navigate to
Ethernet
>
IPv4 Configuration
.
4. Configure IPv4 addresses in the following way:
• To enable DHCPv4, select
Yes
from the drop-down menu next to the
Use DHCP
option.
• Enter the required values in
IPv4 Address
,
Subnet Mask
and
IPv4 Gateway
fields.
5. Scroll to the end of the Ethernet page, and press
Save
.
Configuring a DHCP server in the dual and IPv6-only
environments
About this task
In the dual (IPv4 and IPv6) and IPv6-only environments, the phone acquires vendor-specific
parameters, including the IP address of the file server, through DHCPv6 vendor-specific option 17.
Use this procedure to set this option with an opt-code 242 to obtain an IPv6 address for the file
server.
Before you begin
In the dual environment, install the DHCPv4 and DHCPv6 server software according to
instructions provided by your vendor.
In the IPv6-only environment, install the DHCPv6 server.
Procedure
1. Depending on the environment, do one of the following:
• In the dual environment, specify the IP address of the file server using DHCPv4.
• In the IPv6-only environment, specify the IP address of the file server using DHCPv6.
2. Configure the DHCPv6 server to send a Vendor-Specific Information (VSI) option with an
enterprise number of 6889 which is the Avaya Enterprise Number.
3. Include the vendor-specific option 17 with an opt-code of 242 within that option.
4. Set the option-data portion of the vendor-specific option with the HTTPSRVR parameter.
Example
The following shows an example of setting the vendor-specific option 17 in the
dhcp6.conf
file:
## SSON on Avaya phone default is 242
## Specific the HTTP server used by the Avaya phones
## Allocate 2 bytes for option code, 2 bytes for option data length, 3 hash buckets
Servers, VLAN, and IP configuration
April 2020
Installing and Administering Avaya J100 series IP Phones in an Open SIP
environment
76