Home
/
Avaya
/
J100 Series
/
Installing And Administering

Avaya J100 Series, Installing And Administering, Page: 216 / 528

Share

Page: 216 / 528

Avaya J100 Series Installing And Administering Download Page 216

Parameter name

Default value

Description

COVERAGEADDR

—

Sets the address to which calls
are forwarded for the call
coverage feature.

Users can change or replace this
administered value if
CALLFWDSTAT is not 0.

Note:

This parameter is not
supported in an Open SIP
environment.

Call forwarding on Broadsoft

The Broadsoft server provides the following Call Forwarding types:

• Call Forward: Diverts all incoming calls to another number.
• Call Forward Busy: Diverts incoming calls to another number if you are on a call.
• Call Forward No Answer: Diverts incoming calls to another number when you do not answer

the call within a stipulated time.

In the environment with the Broadsoft server, the Call Forwarding feature can be configured in

either of the following ways:

• by using the Main Menu of the phone.
• through the Broadsoft web portal.

For more information about configuring Call Forwarding on the Broadworks web portal, refer to

Feature Reference documentation at

https://www.broadsoft.com/

For more details on feature configuration using the phone menu, refer to

Avaya J100 IP Phone

Feature Reference: Do Not Disturb and Call Forwarding

.

Call Waiting

The Call Waiting feature is to used to get a notification about another incoming call even when

phone has an active call. If this feature is enabled, the caller is put on waiting instead of hearing a

busy tone.

The phone displays incoming call screen, plays incoming call ringtone, and the beacon LED

flashes.

To configure Call Waiting feature by using the Broadworks web portal, see the Broadworks

configuration guide.

Feature and application configuration

April 2020

Installing and Administering Avaya J100 series IP Phones in an Open SIP

environment

216

Comments on this document? [email protected]

«
...
214
215
216
217
218
...
»

Summary of Contents for J100 Series

















































































































































































































































































































































































































































































































































Reviews:

No comments