manualshive.com logo in svg

Avaya J100 Series, Installing And Administering, Page: 214 / 528

Share
Download
Avaya J100 Series Installing And Administering Download Page 214

Call decline policy

The user can decline an incoming call when they do not want to answer a call. You can set the
Call decline policy for the extensions. The call is declined with a audio message or a busy tone
depending on the call decline policy you set. You can set the Call decline policy for the incoming
calls by using one of the following:

•

46xxsetting.txt

 file

• Web interface of the phone

This feature is available on BroadSoft, 3CX and Asterisk environments. When you enable the Call
decline policy feature, the user can decline the incoming calls of the following active features:

• Shared call appearance

• BroadWorks Anywhere

• BroadWorks Mobility

For BroadSoft environment, you can enable the feature using the BroadWorks web portal. For
more information, see 

https://supportcenter.broadsoft.com/

Avaya J129 IP Phone does not support this feature.

Call forwarding on a generic SIP server

With the Call Forwarding feature, you can divert incoming calls to another number.

You can configure Call Forwarding on a generic SIP server in either of the following ways:

• by enabling or disabling the feature on the phone web interface
• by setting the required parameters in the 

46xxsettings.txt

 file

Configuring Call Forwarding on the phone web interface

About this task

Use this procedure to enable or disable the Call Forwarding feature through the web interface of

the phone.

Procedure

1. Log in to the web interface.

2. In the navigation pane, go to 

Settings

.

3. Select 

Feature access

.

4. In the 

Call Forward

 field, click one of the following:

•

Allow

: To enable the call forward option.

•

Do not allow

: To disable the call forward option.

Feature and application configuration

April 2020

Installing and Administering Avaya J100 series IP Phones in an Open SIP

environment

214

Comments on this document? [email protected]

Summary of Contents for J100 Series

















































































































































































































































































































































































































































































































































Reviews:

No comments