manualshive.com logo in svg

Avaya J100 Series, Installing And Administering, Page: 21 / 528

Share
Download
Avaya J100 Series Installing And Administering Download Page 21

J159

• IEEE 802.3af PoE Class 1 without a wireless

module or USB device.

• IEEE 802.3af PoE Class 2 with a wireless

module, USB device, or a wireless module
together with USB device.

J169

• IEEE 802.3af PoE Class 1 without a button

module.

• IEEE 802.3af PoE Class 2 with a button module.

J179

• IEEE 802.3af PoE Class 1 without a wireless

module or a button module.

• IEEE 802.3af PoE Class 2 for one or more button

modules, a wireless module, or a wireless module
together with one or more button modules.

Note:

Use 5V DC adapter if you simultaneously
connect a wireless module along with one or
more button modules of any model.

Supported codecs

Avaya J100 Series IP Phones supports the following codecs:

Models

J129

J139

J159

J169

J179

Codecs

• G.711a

• G.711µ

• G.729

• G.729a

• G.729ab

• G.726

• G722

• OPUS

• G.711a

• G.711µ

• G.729

• G.729a

• G.729ab

• G.726

• G722

• OPUS

• G.711a

• G.711µ

• G.729

• G.729a

• G.729ab

• G.726

• G722

• OPUS

• G.711a

• G.711µ

• G.729

• G.729a

• G.729ab

• G.726

• G722

• OPUS

• G.711a

• G.711µ

• G.729

• G.729a

• G.729ab

• G.726

• G722

• OPUS

Supported codecs

April 2020

Installing and Administering Avaya J100 series IP Phones in an Open SIP

environment

21

Comments on this document? [email protected]

Summary of Contents for J100 Series

















































































































































































































































































































































































































































































































































Reviews:

No comments