Avaya J100 Series Installing And Administering Download Page 185

Page: 185 / 528

Parameter name

Default Value

Description

EXCHANGE_USER_DOMAIN

Null

Specifies the domain for the URL
used to obtain Exchange contacts
and calendar data. The
parameter is used as a part of the
user authentication.

The value can contain 0 to 255
characters.

PROVIDE_EXCHANGE_CALEN
DAR

Specifies if menu items for
exchange calendar are displayed.

Value operation:

• 0: Not displayed

• 1: Displayed (default)

PROVIDE_EXCHANGE_CONTA
CTS

Specifies if menu items for
exchange contacts are displayed.

Value operation:

• 0: Not displayed

• 1: Displayed (default)

USE_EXCHANGE_CALENDAR

Specifies whether the Calendar
synchronizes with the Microsoft
Exchange.

Value operation:

• 0: To disable synchronization.

• 1: To enable synchronization.

Contacts list

With the enabled Contacts list feature, the end user can view, add and edit the list of numbers,

and make calls by selecting a contact name or a number. The user can also create a local

Contacts group with the numbers added to the Contacts list, search an available LDAP directory,

add and remove contacts from the Groups list.

Check

LDAP Directory

on page 226 for LDAP configuration.

Contacts list configuration

Use the

46xxsettings.txt

file to set the following parameters:

Application configuration

April 2020

Installing and Administering Avaya J100 series IP Phones in an Open SIP

environment

185

Comments on this document? [email protected]

Summary of Contents for J100 Series

















































































































































































































































































































































































































































































































































Search results

Summary of Contents for J100 Series

Reviews:

Avaya J100 Series, Installing And Administering, Page: 185 / 528

Search results

Summary of Contents for J100 Series

Reviews: