manualshive.com logo in svg

Avaya J100 Series, Installing And Administering, Page: 117 / 528

Share
Download
Avaya J100 Series Installing And Administering Download Page 117

3. Configure the following areas:

• SIP Account

• XSI

• Busy Lamp Field (BLF)

• SIP Global Settings

• Codecs and DTMF

• RTP

• SRTP

• Timers and Count

• Local Port

• Miscellaneous

4. Click one of the following:

•

Save

: To save the configuration changes.

•

Reset to Default

: To revert to the default values.

SIP settings field descriptions

Name

Description

SIP Account

Registration Status

Displays the SIP account status. The field is automatically populated.

The status can be the following:

• Not Configured

• Not Registered

• Registered

Display Name

Specifies Caller ID, displayed for the remote party instead of a phone
number or an extension number. Valid value is a text string of non-ASCI
symbols.

Table continues…

Configuring the phone using the web interface

April 2020

Installing and Administering Avaya J100 series IP Phones in an Open SIP

environment

117

Comments on this document? [email protected]

Summary of Contents for J100 Series

















































































































































































































































































































































































































































































































































Reviews:

No comments