manualshive.com logo in svg

Avaya J100 Series, Installing And Administering, Page: 111 / 528

Share
Download
Avaya J100 Series Installing And Administering Download Page 111

Name

Description

LLDP

Specifies the status of LLDP.

The options are:

•

Disabled

•

Enabled

•

Enabled- only if LLDP frame is received (default)

Ethernet Interface

Ethernet

Specifies the speed and duplex settings for the Ethernet line interface.

The options are:

•

Auto-negotiate (default)

•

10Mbps half-duplex

•

10Mbps full-duplex

•

100Mbps half-duplex

•

100Mbps full-duplex

PC Ethernet

Specifies the speed and duplex settings for the secondary (PC)
Ethernet interface.

The options are:

•

Disable

•

Auto-negotiate (default)

•

10Mbps half-duplex

•

10Mbps full-duplex

•

100Mbps half-duplex

•

100Mbps full-duplex

PC Ethernet auto-MDIX

Specifies the status of the auto-MDIX on PHY2.

The options are:

•

Enable (default)

•

Disable

Configuring Wi-Fi settings

About this task

When you click on any configuration field, the screen displays the details of that field in the

Parameter Help section.

Procedure

1. Log in to the web interface as an administrator.

Configuring the phone using the web interface

April 2020

Installing and Administering Avaya J100 series IP Phones in an Open SIP

environment

111

Comments on this document? [email protected]

Summary of Contents for J100 Series

















































































































































































































































































































































































































































































































































Reviews:

No comments