Avaya IP Office Phone Manager Manual Download Page 93

Page: 93 / 324

Phone Based Administration

Page 93

- Issue 6a (Thursday, February 22, 2018)

IP Office Basic Edition

Comments on this document? [email protected]

Date and Time:

5.1 Changing the Date

The date held by the system and shown on display telephones can be changed. This should only be set on a system not
using

Network Time Synchronization

1408/1416/9504/9508 Phone

1. At either of the first two extensions on the system, press

Admin

To do the above during a call, you may need to press the

PHONE

button to display the

Admin

soft key

option. If you access phone administration during a call, only the

SPEAKER

MUTE

and

HEADSET

buttons still affect the connected call.

2. Use the

up or down

arrow buttons to scroll the display to

System Administration

. When highlighted, press

Select

3. Use the

up or down

arrow buttons to scroll the display to

System Parameters

. When highlighted, press

Select

Alternatively, dial

and the

system administration

code.

4. Use the

up or down

arrow buttons to scroll the display to

System Date

. When highlighted, press

Select

5. Enter the new system date in the format

MMDDYY

using the dial pad. For example 120409 is the date December

4th 2009.

Exit programming by pressing

PHONE

. Alternatively use the

Back

button to move to another menu.

M7324/M7324N/M7310/M7310N/T7316/T7316E Phone

1. At either of the first two extensions on the system, press

Feature **config

(ie.

Feature **266344

If the system has a

system password

set, it is requested. Enter the password.

2. The phone displays

System Admin

3. Dial

#101

. The phone will display

System Date

4. Enter the new system date in the format

MMDDYY

using the dial pad. For example 120409 would be used to

enter the date December 4th 2009.

To exit phone based administration at any time, press the

Release

button. To select a different process use the

Next Procedure

Previous Procedure

buttons or dial another feature code.

ETR 18D/ETR 34D Phone

1. At either or the first two extensions on the system, press

Feature 0 0

followed by two presses of the first

intercom or call appearance button.

System Administration:

is shown on the display.

3. Dial

#101

. The phone will display

System Date

4. Enter the new system date in the format

MMDDYY

using the dial pad. For example 120409 would be used to

enter the date December 4th 2009.

Exit programming by pressing

Feature 00

. You can also exit programming mode by lifting the handset, then

placing it back in the cradle.

114

Summary of Contents for IP Office Phone Manager





































































































































































































































































































































Search results

Summary of Contents for IP Office Phone Manager

Reviews:

Avaya IP Office Phone Manager, Manual, Page: 93 / 324

Search results

Summary of Contents for IP Office Phone Manager

Reviews: