Avaya IP Office Phone Manager Manual Download Page 248

Page: 248 / 324

Phone Based Administration

Page 248

- Issue 6a (Thursday, February 22, 2018)

IP Office Basic Edition

Comments on this document? [email protected]

16.13 Calling Group

This function allows the user to call or page the

calling group

represented by the button.

1408/1416/9504/9508 Phone

1. Do one of the following depending on whether you want to change the button programming of the extension you

are using or that of another extension.

To program the same extension

To program another extension

a. At the extension, press

Admin

b. Use the

up or down

arrow buttons to

scroll the display to

Telephone

Programming

. When highlighted, press

Select

a. At either of the first two extensions on the system, press

Admin

b. Use the

up or down

arrow buttons to scroll the display to

Centralized Programming

. When highlighted, press

Select

At the

Extension:

prompt enter the extension that you want to

configure.

To do the above during a call, you may need to press the

PHONE

button to display the

Admin

soft key

option. If you access phone administration during a call, only the

SPEAKER

MUTE

and

HEADSET

buttons still affect the connected call.

2. Press the button to edit. Alternatively using the

up or down

arrows, scroll to

Button Programming

and

press

Select

. Enter from 03 to 99 or press the corresponding button.

3. Press

Program

and either the first intercom or call appearance button or use the

up or down

arrow buttons

to scroll the display to

Calling Group

and press

Select

4. At the

Endpoint:

prompt enter the

calling group

number for the button, 71 to 74.

A page call to the calling group members can be selected by adding a

in front of the calling group number.

5. The button function is changed to

Calling Group

followed by the calling group number.

Exit programming by pressing

PHONE

. Alternatively use the

Back

button to move to another menu.

M7324/M7324N/M7310/M7310N/T7316/T7316E Phone

1. Do one of the following depending on whether you want to change the button programming of the extension you

are using or that of another extension.

To program the same extension

To program another extension

a. Press

Feature

and dial

If the system has a system
password set, it is requested.
Enter the password.

a. At either of the first two extensions on the system, press

Feature

**user

(ie.

Feature **8737

If the system has a

system password

set, it is requested. Enter the

password.

b. At the

Extension:

prompt enter the extension number of the extension you

want to program.

2. To select the button, press the corresponding button. For buttons up to 99, you can also dial the button number.

The current setting of the selected button is displayed.

3. Press the first intercom or call appearance button.

4. Enter the

calling group

number for the button, 71 to 74.

A page call to the calling group members can be selected by adding a

in front of the calling group number.

5. The button function is changed to

Calling Group

followed by the calling group number.

To exit phone based administration at any time, press the

Release

button. To select a different process use the

Next Procedure

Previous Procedure

buttons or dial another feature code.

183

114

183

Summary of Contents for IP Office Phone Manager





































































































































































































































































































































Search results

Summary of Contents for IP Office Phone Manager

Reviews:

Avaya IP Office Phone Manager, Manual, Page: 248 / 324

Search results

Summary of Contents for IP Office Phone Manager

Reviews: