Avaya IP Office Phone Manager Manual Download Page 166

Page: 166 / 324

Phone Based Administration

Page 166

- Issue 6a (Thursday, February 22, 2018)

IP Office Basic Edition

Comments on this document? [email protected]

11. Account Codes

When you set up

account codes

on the system, users at extensions set to

Forced Account Code Entry

must enter

an account code before they can dial outside calls. Other extensions can also use account codes but on a voluntary basis.
They can enter

When an account code is entered during a call, the caller on the other end does not hear the touch-tone digits
dialed.

If SMDR is used, the account code assigned to a call is included in the SMDR record for that call.

You can program the

Account Code Entry

button on a phone. Use a button with LEDs/LCD.

For faster entry of frequently used account codes, you can program an account code on an

Auto Dial

button or

as a

system speed dial

personal speed dial

number (but not as a marked system speed dial number).

167

169

228

234

139

141

Summary of Contents for IP Office Phone Manager





































































































































































































































































































































Search results

Summary of Contents for IP Office Phone Manager

Reviews:

Avaya IP Office Phone Manager, Manual, Page: 166 / 324

Search results

Summary of Contents for IP Office Phone Manager

Reviews: