Avaya IP Office Phone Manager Manual Download Page 13

Page: 13 / 324

Phone Based Administration

Page 13

- Issue 6a (Thursday, February 22, 2018)

IP Office Basic Edition

Comments on this document? [email protected]

Overview: Programmable Buttons

1.3 DS Phones

This covers the 1400 Series and 9500 Series phones supported by the IP Office Basic Edition system.

1400 Series Phones

9500 Series Phones

All these phones can be used for programming except the 1403. The phones enter the various programming modes
through

admin menus

displayed on the phone. These menus are accessed by pressing the

Admin

display soft key.

The menus are dynamically adjusted depend on whether the phone is connected to one of the first two extensions or not.

To access the administration menus during a call, you may need to press the

PHONE

button to display the

Admin

soft key option. If you access phone administration during a call, only the

SPEAKER

MUTE

and

HEADSET

buttons still affect the connected call.

To exit administration, press the

PHONE

button.

Summary of Contents for IP Office Phone Manager





































































































































































































































































































































Search results

Summary of Contents for IP Office Phone Manager

Reviews:

Avaya IP Office Phone Manager, Manual, Page: 13 / 324

Search results

Summary of Contents for IP Office Phone Manager

Reviews: