manualshive.com logo in svg

Avaya IP Office Essential Edition PARTNER Version, Reference Manual, Page: 64 / 119

Share
Download
Avaya IP Office Essential Edition PARTNER Version Reference Manual Download Page 64

PARTNER®  Version, Installation and Reference Manual

Page 63

- Issue 1a (30 January 2010)

IP Office Essential Edition

System Component Details: Telephones

Name

Description

Transfer

Press Transfer to transfer a call to another number.

Drop

Press Drop to drop the active call. While on a conference call, press Drop to drop the last person
added to the conference call.

Volume

Press + or - on the volume button while active on the handset or speaker to adjust the volume.
To adjust the volume of the ringer, press + or - on the volume button while the handset and
speaker are inactive.

Mute

Press Mute to mute a call in progress. To take a call off mute, press Mute again.

Speaker

Press Speaker to use the speakerphone. To take a call off speakerphone, lift the handset.

Feature Buttons and
Call/Line
Appearance Buttons

There are 3 buttons that can be programmed by the system administrator as either call/line
appearance buttons or feature buttons. Press a call/line appearance button to make or answer a
call or resume a call on hold. Press a labeled feature button to enable or disable that feature.
Typically, two buttons are administered as call/ line appearance buttons and one button is
administered as a feature button. The feature button provides access to an Avaya call
management system feature that has been administered for your extension. The green LED next
to the feature button indicates if the feature is currently on or off. If the light is on, the feature is
on.

4.6.4 ETR34D

This phone is only supported by an 

ETR6 card

 in the Essential Edition - PARTNER® Version system. 

All 'Refresh' and 'Euro Style' variants of the phone are supported. An additional analog device using the same extension
number can be connected via the ETR phone AUX socket.

The Essential Edition - PARTNER® Version system supports up to maximum 4 ETR34D handsets (2 per ETR6 module)  

The ETR PARTNER® Version telephones have fixed buttons that are already imprinted and line buttons that you can press
to connect to an inside (intercom) or outside line. If a line button is not assigned as an intercom or outside line button,
you can program an extension number or a feature on it. The telephones also have a display, which provides feedback
messages and prompts from the system.

Summary of Contents for IP Office Essential Edition PARTNER Version
























































































































Reviews:

No comments