manualshive.com logo in svg

Avaya IP Office Essential Edition PARTNER Version, Reference Manual, Page: 37 / 119

Share
Download
Avaya IP Office Essential Edition PARTNER Version Reference Manual Download Page 37

PARTNER®  Version, Installation and Reference Manual

Page 36

- Issue 1a (30 January 2010)

IP Office Essential Edition

3.2.9 Wall Mounting

The IP Office 500v2 control unit can be wall mounted. This requires an IP
Office 500 Wall Mounting Kit (SAP 700430150) plus additional 4.5mm
fixtures and fittings suitable for the wall type. The wall mounting kit
includes two brackets, one top and one bottom.

Environmental Requirements 
In addition to the existing 

environmental requirements

 for an IP Office

system, the following additional requirements apply when wall mounting
a unit:

·

 The wall surface must be vertical, flat and vibration free.

·

 A minimum clearance of 500mm (19.7 inches) is required on

all sides.

·

 The unit must be orientated as shown when mounted. That is

with the base card slots facing right when viewed from in front of
the unit.   

·

 The brackets must be used as shown, with the deeper tray-

like bracket used at the bottom of the wall mounted control unit.

·

 Only the screws (M3 x 6mm) provided with the mounting kit

should used to attach the brackets to the control unit.

 

Summary of Contents for IP Office Essential Edition PARTNER Version
























































































































Reviews:

No comments