Ringer Controls - Page 7
Ringer Controls
Ringer Tone
You can select between 9 ringer tones (not available when twinned with a
desk top phone).
1.
Press
MENU
and
PROFILE SET UP
appears. Press
and select the
required Profile (1 or 2) then press again.
2.
Press
>
until
RINGER
TONE
appears, then press . Use
<
and
>
to
select the tone required. To help the tones are played during selection.
3.
When the required tone is found, press to save it.
4.
Press
MENU
to finish.
Ringer Volume, On/Off
You can adjust the volume of your ringer (five levels) or you can switch the
ringer off (not available when twinned with a desk top phone). This is useful
when going into meetings. With the ringer off, incoming calls make the
handset vibrate. The ringer volume must be reset manually.
To switch the handset ringer on/off:
1.
Press
MENU
and
PROFILE SET UP
appears. Press
and select the
required Profile (1 or 2) then press again.
2.
Press
>
until
RINGER
VOL
.
appears, then press .
3.
Use
<
and
>
to select required level or to switch
OFF
.
4.
Press to save the setting.
5.
Press
MENU
to finish.
B-Answer On/Off (Auto-Answer)
You can set the handset to automatically connect to calls after a single ring
(not available when twinned with a desk top phone). This is useful for
headset operation. When selected,
B-ANSWER
appears on the display.
1.
Press
MENU
and
PROFILE SET UP
appears. Press
and select the
required Profile (1 or 2) then press again.
2.
Press
>
until
B-ANSWER
appears and then press .
3.
Use
<
and
>
to switch
ON
or
OFF
.
4.
When set as required press .
5.
Press
MENU
to finish.
IP Office - 20DT Handset User's Guide
Ringer Tone - Page 7
40DHB0002UKCH Issue 3 (25/09/2002)
