Page 12 - Using the Handset
Using the Handset
Switching On/Off
To switch the handset on press and hold down
until
INDeX
appears. To
switch the handset off, press
until you hear a tone and the display clears.
•
Signal Symbol
Indicates a base station in range and that your 20DT handset is ready
for use. If the symbol flashes the base station is busy with its maximum
number of calls.
•
Off-Hook Symbol
Shown when making calls and during conversations. Use
key to
disconnect.
Answering Calls
To answer an incoming call:
Press
.
To cancel a message waiting lamp:
Press
∗
, 2 and
twice.
Making Calls
1.
Press
and then dial the number required
(prefix external calls with 9).
Or
2.
Dial the number required and press
.
Last Number Redial
1.
To access the redial stack (up to 10 different numbers) press
REDIAL.
2.
Press
>
until the required number appears (from newest to oldest).
3.
Press
to call the desired number.
Locking the Keyboard
You can lock the handset keys. This stops calls being accidentally started.
Whilst locked the handset displays
KEY LOCKED
. You can still answer
calls by pressing the
key.
1.
To lock or unlock the keyboard, press
MENU
and then
LOCK.
Recall
The
R
key produces a 'recall' signal and is used to Hold calls. When a call
is held, you will hear a dial tone. In addition, some PBX's may need this
'recall' signal to access specific functions.
Page 12 - Switching On/Off
IP Office - 20DT Handset User's Guide
40DHB0002UKCH Issue 3 (25/09/2002)
