Page 10 - Subscribing
Subscribing
Introduction
For DECT handsets to be connected to a DECT system they have to go
through a process called ‘subscription’.
Logging On:
The 20DT can subscribe to any one of four DECT systems. However,
although the 20DT can subscribe to up to four systems, it can only be
logged onto one of those systems at any one time.
Subscribing to a New System
Before a handset can subscribe the system manager must allow
subscription. To do this they need to known the handset's serial number.
This is shown on a label covered by the handset battery. Remove handset
back cover and lift out battery unit to show label. The serial number follows
the characters
SN:
.
To subscribe the following information is required:
•
An extension number on the system (provided by your system
manager).
•
The ID number of the DECT system.
•
An account code if necessary (provided by your system manager).
To subscribe to a new system:
1. Press
MENU,
then
>
until
LOGIN
appears and then press .
SELECT
LOGIN
appears
2. Press
>
until
SUBSCRIPTION CREATE
appears, then press .
3. Press
>
until required system
SEARCH ID
number
appears.
•
The handset displays the ID's of any systems in range.
If there are several systems locally, use
<
and
>
to display the
different ID numbers found.
4. When the required ID is shown, press .
5.
CREATE SYSTEM 1
to
4
appears.
Press
>
until required
SYSTEM
number (1 to 4)
appears.
6.
AC: _ _ _ _ _ _
also appears. If required, enter an Account Code
and/or press .
7.
SUBSCRIPTION WAIT
appears. If for some reason your handset
cannot subscribe it displays
FAILED
. Press to try again from step 2
above or press
MENU
to stop.
8. When successfully subscribed, your handset bleeps and the name of
the system that you are connected to is displayed.
Page 10 - Introduction
IP Office - 20DT Handset User's Guide
40DHB0002UKCH Issue 3 (25/09/2002)
