Tools & Experience Required
Page 13
Preparing for Installation
Tools & Experience Required
The installer is expected to have knowledge of INDeX system programming
General:
– 6.5mm slot head screwdriver
– No.1 Phillips screwdriver
– Cutter/knife for cable ties
– Cable ties - 3mm x 50mm
– Drill and masonry drill bits
– Tape measure (up to 500mm)
– Spirit
level
– Digital voltmeter (DVM).
Programming:
– Windows 3.x/95 or NT PC with serial port supporting 19.2K baud minimum.
Additional Parts Required
The following items are required in addition to those supplied by Avaya
per DECT Base Station: (DBS)
– 1 x Slave jack socket (see country variants on page 16)
– Single-twisted pair cable (Type CW1308) from MDF to slave jack socket
Environmental requirements
The planned locations for all parts of the system must meet the following
requirements:
– Check that the area is a well ventilated area, having a temperature range of 0
°
C
to +40
°
C and a humidity range of 10% to 90% non-condensing
– Check there are no flammable materials in the area
– Check there is no possibility of flooding
– Check that no other machinery or equipment needs to be moved first
– Check that it is not an excessively dusty atmosphere
– Check that the area is unlikely to suffer rapid changes in temperature and
humidity
– Check for the proximity of strong magnetic fields, sources of radio frequency and
other electrical interference
– Check there are no corrosive chemicals or gasses
– Check there is no excessive vibration or potential of excessive vibration,
especially on the cabinet mounting surface.
Installation Manual
Page 13
INDeX CSLC
38DHB0002UKCA – Issue 8 (26/03/2002)