20CC Telephone User Guide
Page 31
IP Office
40DHB0002UKAJ Issue 6b (2nd December 2004)
Phone Settings
The Phone Passcode
If the phone displays
ENTER PASSCODE,
it expects you to dial its four-digit passcode. The default
passcode is 0000.
Wrong passcode entry can result in the phone becoming barred. Barred phones cannot access features
requiring passcode entry. They can still make internal and emergency calls.
To enter the phone's passcode:
1. Dial the 4-digit passcode. If you make a mistake, press
z
CANCEL
and restart entry.
2. If you enter the wrong number, the phone displays
REENTER
. Enter the passcode again or press
PROGRAM
to end programming.
3. If you enter the wrong passcode 5 times, the phone displays
THIS TERMINAL IS BARRED
. To
unbar your phone use the change passcode process below to set a new passcode.
To change the phone's passcode:
1. Press
PROGRAM
and then
SCROLL
twice. Press
z
PASS
.
2. Enter the current passcode.
3. The display shows
ENTER NEW CODE
. Enter the new passcode (all passcodes must be four
digits).
•
To restart after a mistake, press
z
CANCEL
.
