Avaya IG550, Installing And Configuring

Page: 170 / 196

Recovering passwords
170 Installing and Configuring the IG550 Integrated Gateway
2. Plug the RJ-45-to-DB-9 serial port adapter into the serial port on your personal computer
( Figure 47 ). Connect the other end of the Ethernet rollover cable to the console port on the
router ( Figure 47 ).
3. Turn on the power to the personal computer. Start Microsoft Windows Hyperterminal or
another asynchronous terminal emulation application. Select the appropriate COM port to
use, such as COM1.
4. Configure the port settings as follows:
●
Bits per second: 9600
●
Data bits: 8
●
Parity: none
●
Stop bits: 1
●
Flow control: none
Rebooting the router and changing the root password
1. Press the power button to turn off the router.
2. Press the power button again to turn on the router, and watch carefully as the system
begins to boot up .
The boot loader displays the boot loading script, and briefly stops booting at the following
prompt:
3. Press the spacebar immediately.
The ok prompt appears.
4. Enter
boot -s
.
The system performs a single-user boot-up process and displays the following prompt:
5. Enter
recovery
.
The system finishes booting and displays instructions to set a new root password and the
CLI (>) prompt.
Hit [Enter] to boot immediately, or space bar for command prompt.
Booting [kernel] in 8 seconds...
Enter full pathname of shell or ‘recovery’ for root password
recovery or RETURN for /bin/sh: