Configuring automatic provisioning for phone display
background image and icons
Before you begin
Ensure that you compress the BMP files in
tar.gz
file format and that the files meet the picture
requirements.
Procedure
1. Open the configuration file template that you downloaded from the
website.
2. In the AUTOUPDATE CONFIG MODULE section of the configuration file template, to
configure background picture and icons, type
Auto Etc Url
with the path of the firmware
file.
For example:
Auto Etc Url:ftp://1:[email protected]/xxx.tar.gz
.
The path of the firmware file can use HTTP, HTTPS, or FTP protocol. The Url must have
the following format
ftp://username:password@serverIP/xxx.tar.gz
.
For example, in
ftp://abc:[email protected]/xxx.tar.gz
file path, where abc is
the username, xyz is the password, and 172.16.6.62 is the server IP.
3. In the PHONE CONFIG MODULE section of the configuration file template, to configure a
key on the screen, add lines in following format:
Fkey1 Type: 1
Fkey1 Value: 1005@1/f
Fkey1 Title: Reception
Fkey2 Type: 1
Fkey2 Value: 1006@1/f
Fkey2 Title: Service
Fkey3 Type: 1
Fkey3 Value: 1007@1/f
Fkey3 Title: Cleaning
Fkey4 Type: 1
Fkey4 Value: 1008@1/f
Fkey4 Title: Wakeup
Fkey5 Type: 1
Fkey5 Value: 1009@1/f
Fkey5 Title: Manager
Fke6 Type: 1
Fkey6 Value: 1010@1/f
Fkey6 Title: Emergency
Phone settings configuration and management
October 2019
Installing and Administering the Avaya H239 and H249 Phones
44
