manualshive.com logo in svg

Avaya H.323 9621G, Installing And Maintaining, Page: 55 / 94

Share
Download
Avaya H.323 9621G Installing And Maintaining Download Page 55

Procedure

1. When you select GROUP from the Craft Local Procedure Screen, the following text

displays:

Current Setting: 

New Setting: 

where the 

setting 

is the current system value of NVGROUP.

2. Enter a valid 

Group 

value from 0 to 999.

3. Press 

Save

 to store the new setting. The deskphone redisplays the Craft Local

Procedure screen.

Setting handset audio equalization

About this task

 Note:

Use the following procedure to set or change the handset audio equalization value.

Procedure

1. When you select HSEQUAL from the Craft Procedures screen, the following

displays:

• Current Setting:

• New Setting:

Where the Current Setting is the current value of HSEQUALIZATION, an internal
parameter that combines the audio equalization specifications of the settings file,
user option, and Local Procedure.
The values are 

Default

 TIA-810/920 and S004 is used, 

Audio Opt

 TIA-810/920 and

S004 is used, or 

HAC Opt

 HAC is used. The only difference between 

Default

 and

Audio Opt

 is that in the second case, either the settings file, the user option, or the

Local Procedure has explicitly selected TIA-810/920 and S004.

2. Press 

Save

 to store the new setting and redisplay the Craft Procedures screen.

Setting handset audio equalization

Installing and Maintaining Avaya IP Deskphone H.323 9608, 9611G, 9621G, and 9641G

August 2013     55

Summary of Contents for H.323 9621G































































































Reviews:

No comments