Running Craft procedures during startup
Procedure
1. Press
*
to display the Craft Access Code Entry screen during deskphone startup
and start local procedures:
Enter code:__
# = OK
2. Enter the local dialpad procedure password that can be composed of any numeric
digits fro zero to seven, as specified by the system administrator in the system value
PROCPSWD.
For security purposes, the deskphone displays a star (*) for each numeric dialpad
press. If you are using a touch screen deskphone, and need to go back one space
during password entry, use the
Contacts
button. You can use the left arrow button
or the designated softkey for non-touch screen phones.
3. Press
#
when the password entry is complete.
The entry is compared to the PROCPSWD value. If they match, the deskphone
displays the Craft Local Procedure screen, and the message Select procedure and
press Start.
4. For all non-touch screen phones, use the navigation arrows to scroll to and highlight
the local procedure you want, then press
Start
or
OK
.
You can also scroll to the procedure you want and press the corresponding line
button. For touch screen phones, scroll to the local procedure you want if it not
already displayed then touch the line on which the local procedure you want
appears.
Accessing Craft procedures during normal operation
Procedure
1. To run the local procedures, press the
Mute
button, enter the password using the
designated digits from zero to seven, then press the pound (#) key.
If you are using a touch screen phone and need to move one space back during
password entry, use the Contacts button. In case of non-touch screen phones, use
the left arrow button or the designated softkey.
A six second time-out is in effect between button presses after you press the
Mute
button. If you do not press a valid button within 6 seconds of pressing the previous
Running Craft procedures during startup
Installing and Maintaining Avaya IP Deskphone H.323 9608, 9611G, 9621G, and 9641G
August 2013 39