manualshive.com logo in svg

Avaya G700, Installing And Upgrading, Page: 81 / 808

Share
Download
Avaya G700 Installing And Upgrading Download Page 81

About hardware components

Issue 10.2 May 2007

81

 

Information on installing the G700 using the S8400, S8500 or S8700/S8710/S8720 as the 
primary controller can be found in Chapters 4 and 6 in this book.

About endpoint and adjunct components

Additional components and adjunct systems provide sets of tools that allow the customer to 
obtain the best possible performance. 

Other components and adjunct systems that make up the S8300 Media Server with a G700 
Media Gateway include: 

●

Analog phones and fax machines

●

DCP phones

●

IP phones

●

IP Softphones 

●

LAN Ethernet switches

●

Avaya Integrated Management

●

INTUITY AUDIX LX Messaging System

●

IA 770 INTUITY AUDIX Messaging Application

●

ASAI Co-Resident DEFINITY LAN Gateway (DLG)

●

Call Center

●

Uninteruptible Power Supply (UPS)

●

Universal Serial Bus (USB) Modems

●

USB Compact Flash device (S8300C only)

●

DVD/CD-ROM drive

See 

Chapter 7: Telephones and adjunct systems

 for more information on installing adjuncts.

About installation planning

In the following sections of this installation guide, you will be guided through the installation of 
several configurations. Before the G700 components are physically installed on the customer's 
site, several steps will already have been completed to assure that the actual installation will go 
smoothly: 

●

Sales personnel have verified that the product is suited to the customer’s application. 

●

Planning and implementation personnel have conducted preliminary inspections of the site 
and of the other equipment to assure that the S8300/G700 solution will operate at its full 
potential. 

Summary of Contents for G700









































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments