Avaya G700, Installing And Upgrading, Page: 752 / 808

Manual upgrade of an existing S8300B and G700 to S8300C with R4.0
752 Installing and Upgrading the Avaya G700 Media Gateway and Avaya S8300 Media Server
View Process Status screen
3. Make sure everything except ENV , arbiter , and dupmgr shows UP . Communication
Manager should show 65/65 UP or, if IA770 is installed, 67/67 UP .
The number of processes (67/67) may vary depending on the configuration. For a normal
state, the second number should not be greater than the first number. For example, the
numbers 66/67 UP would indicate that a process did not come up and should be
investigated before proceeding.
4. Using a telephone, make test calls to verify that call processing is working.
5. Run an IA770 sanity test:
a. At the Linux command line, type
/vs/bin/display
b. All states should be
Inserv
with an associated phone number.
c. Retrieve the test message saved before the upgrade.
Saving translations
To save translations:
1. In the SSH session, open a SAT session.
2. Log in again as craft .