manualshive.com logo in svg

Avaya G700, Installing And Upgrading, Page: 736 / 808

Share
Download
Avaya G700 Installing And Upgrading Download Page 736

Manual upgrade of an existing S8300B and G700 to S8300C with R4.0

736 Installing and Upgrading the Avaya G700 Media Gateway and Avaya S8300 Media Server

 

If the server is an LSP, stop and start Communication Manager

If you are upgrading an LSP, you must restart Communication Manager to sync the license for 
LSP status.

1. Access the server’s command line interface using an SSH client, like PuTTY, and an IP 

address of 

192.11.13.6

.

2. Type 

stop -caf

3. Type

 start -ca

If IA770 INTUITY AUDIX Messaging has been upgraded, verify
messaging has started

If you installed IA770 INTUITY AUDIX Messaging, the messaging application should start after 
you install the license. To verify that messaging has started, perform the following steps:

1. In the Maintenance Web Interface, under Server, click 

Process Status

.

2. Select 

Summary and Display once

 and click 

View

. 

the 

View Process Status Results

 screen displays.

View Process Status screen

Summary of Contents for G700









































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments