manualshive.com logo in svg

Avaya G700, Installing And Upgrading, Page: 694 / 808

Share
Download
Avaya G700 Installing And Upgrading Download Page 694

Manual upgrade of an existing S8300B and G700 to S8300C with R4.0

694 Installing and Upgrading the Avaya G700 Media Gateway and Avaya S8300 Media Server

 

2. Select 

System Configuration and Status

 > 

System Status

. 

Look for “Used Hours of Speech” in the list. If more than 72 hours is reported, the customer 
must delete some messages before the upgrade. 

Or, you can use the CLI command, 

/vs/bin/util/vs_status

.

Obtaining an IA770 service pack file

If an IA770 service pack is required after the upgrade, obtain the service pack file from the 
Avaya Support web site.

To obtain an IA770 service pack file

1. On the Avaya Support Web site, click on 

Find Documentation and Downloads by 

Product Name

. 

2. Under the letter "I", select 

IA 770 INTUITY AUDIX Messaging Application

. 

3. Click on 

Downloads

.

To download the IA770 patch software:

4. Click on 

IA 770 INTUITY AUDIX Embedded Messaging Application Patches

.

5. Click on the service pack file name for this release. 

For example, 

b.rpm.

6. Click on 

Save

 and browse to the location on your laptop where you want to save the file.

Note:

Note:

The IA770 patch documentation is co-located with the patch software.

Obtaining optional language files

Optional languages are any language other than English (

us-eng

 or 

us-tdd)

. If optional 

languages other than English are used for announcements, you will need to download the 
optional languages from a language CD after the upgrade. Before going to the site, obtain the 
appropriate language CDs or determine that they are available at the site.

Completing the RFA process (obtaining license and password file)

Every S8300 media server and local survivable processor (LSP) requires a current and correct 
version of a license file in order to provide the expected call-processing service. 

The license file specifies the features and services that are available on the S8300 media 
server, such as the number of ports purchased. The license file contains a software version 
number, hardware serial number, expiration date, and feature mask. The license file is 
reinstalled to add or remove call-processing features. New license files may be required when 
upgrade software is installed. 

Summary of Contents for G700









































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments