manualshive.com logo in svg

Avaya G700, Installing And Upgrading, Page: 692 / 808

Share
Download
Avaya G700 Installing And Upgrading Download Page 692

Manual upgrade of an existing S8300B and G700 to S8300C with R4.0

692 Installing and Upgrading the Avaya G700 Media Gateway and Avaya S8300 Media Server

 

For example, the CD may contain a file mm760v60.fdl, but the most recent firmware available 
on the Avaya Web site is mm760v65.fdl. In this case, download the mm760v65.fdl file from the 
Web site for installation instead of installing the file from the CD. As another example, the CD 
may contain the mgp_25_23_0.bin media gateway file, and the Avaya Web site also contains 
mgp_25_23_0.bin. In this case, you could use the firmware from the CD because the versions 
of the files are the same.

!

CAUTION:

CAUTION:

If you are a customer administrator, you might be required to access the 

Download Center

 Web site in order to download firmware. For instructions on 

setting up access to the Download Center, access 

http://support.avaya.com

 and 

click on the appropriate links.

Obtaining service pack files, if needed

Post-upgrade service packs may be needed for this upgrade. If the service pack files are not on 
your software CD, download the service pack files from the Avaya Support web site to your 
laptop.

A post-upgrade service pack may be required. If so, download it from 

http://www.avaya.com/

support

 on the Internet.

To download service packs to the laptop

1. On your laptop, create a directory to store the file (for example, c:\S8300download).

2. Connect to the LAN using a browser on your laptop or the customer’s PC and access 

http://

www.avaya.com/support

 on the Internet to copy the required Communication Manager 

service pack file to the laptop.

3. At the Avaya support site, click 

Downloads

4. Click on 

Latest TN Circuit Pack, Media Server, and Media Gateway Firmware and 

Software Updates

.

5. Scroll down to the 

Software Update table for Media Servers running Communication 

Manager

.

6. Click on the link for the appropriate G.A. load.

7. If you are a Business Partner, scroll to the bottom of the page and select 

Download Center

 

to access the password protected Download Center. Otherwise, for Avaya, click on 

Latest 

Avaya Communication Manager x.x.x Service Pack

 to access the service pack 

download

The File Download window displays.

Summary of Contents for G700









































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments