Avaya G700, Installing And Upgrading, Page: 681 / 808

Post-upgrade tasks
Issue 10.2 May 2007 681
3. Type
save translation
and press Enter .
When the save is finished, the system displays the message,
Command successfully completed.
If using IA770, administering switch integration for H.323
The IA770 INTUITY AUDIX Messaging application uses H.323 signaling instead of the CWY1
board for integration with Communication Manager. The tasks for administering the H.323
integration are explained in
Administering Media Servers to work with IA770 .
Testing to verify system functionality
Test the system for functionality, if you are upgrading an S8300 primary controller;
1. Verify the following:
●
Telephones have dial tone
●
You can call from one telephone to another telephone on the system
●
You can make an external trunk call.
●
The media gateways have registered. Use the SAT command
list media-gateway
.
Completing the upgrade process
(S8300 is the primary controller)
Telnet to the S8300 (primary controller) and open a SAT session:
1. To check media modules on page 682
2. To enable scheduled maintenance on page 682
3. To busy out trunks on page 682
4. To check for translation corruption on page 682
5. To resolve alarms on page 682
6. To re-enable alarm origination on page 683
7. Backing up the system on page 683