Avaya G700 Installing And Upgrading Download Page 662

Page: 662 / 808

Manual upgrade of an existing S8300B or S8300C and G700 to R4.0

662 Installing and Upgrading the Avaya G700 Media Gateway and Avaya S8300 Media Server

If upgrading an LSP, synchronize translations from the primary
controller

If you are upgrading an LSP such that you created this super-user login on the primary
controller, do the following also on the primary controller.

1. Log in with

telnet

ssh

2. At the Linux command line, type

filesync -a

<IP_address_of_LSP>

, where

<IP_address_of_LSP>

is the IP address of the LSP you are upgrading.

If the server is an LSP, stop and start Communication Manager

If you are upgrading an LSP, you must restart Communication Manager to sync the license for
LSP status.

1. Access the server’s command line interface using an SSH client, like PuTTY, and an IP

address of

192.11.13.6

2. Type

stop -caf

3. Type

start -ca

Installing security and Communication Manager service pack
updates, if any

To install update files

1. Under Server Upgrades, select

Manage Updates

The

Manage Updates

screen appears.

Summary of Contents for G700









































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for G700

Reviews:

Avaya G700, Installing And Upgrading, Page: 662 / 808

Search results

Summary of Contents for G700

Reviews: