manualshive.com logo in svg

Avaya G700, Installing And Upgrading, Page: 602 / 808

Share
Download
Avaya G700 Installing And Upgrading Download Page 602

Manual upgrade of an S8300A and G700 to R4.0

602 Installing and Upgrading the Avaya G700 Media Gateway and Avaya S8300 Media Server

 

Starting IA770 INTUITY AUDIX Messaging with the Messaging
Web pages, if necessary

1. From the Maintenance Web Page, select 

Messaging Administration

 from the 

Miscellaneous

 menu.

The Messaging Administration Web page is displayed in a new Web browser window.

2. From the Messaging Administration Web page, select 

Utilities

.

The Utilities Web page is displayed.

3. Select 

Start Messaging Software

.

The Start Messaging Software Web page is displayed. This page will display the status of 
the system as it starts.

4. When the message, "Startup of the Voice System is complete", is displayed, select the 

Return to Main

 button and do the next procedure in this document.

Starting IA770 INTUITY AUDIX Messaging with the command line, 
if necessary

1. Access the server’s command line interface using an SSH client, like PuTTY, and an IP 

address of 

192.11.13.6

.

2. Type

 start -s Audix

3. Ensure that all Communication Manager processes come up.

To monitor the startup of IA770:

a. Type 

watch /VM/bin/ss

The display will periodically refresh automatically. When you see the following display, 
the IA770 startup is complete.

b. Press 

Ctrl

+

C

 to break out of the 

watch

 command.

If IA 770 fails to start after an upgrade

If you have upgraded your Communication Manager and IA 770 INTUITY AUDIX software, you 
must have a new license that is associated with the latest release. IA 770 will not use the 
license for a previous version. 

Summary of Contents for G700









































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments