manualshive.com logo in svg

Avaya G700, Installing And Upgrading, Page: 565 / 808

Share
Download
Avaya G700 Installing And Upgrading Download Page 565

Preparing for the upgrade to R4.0 on-site

Issue 10.2 May 2007

565

 

Backing up system files

For releases 1.2.0 through 1.3.9, this backup is optional but recommended in case there is a 
need to back out of the upgrade.

!

CAUTION:

CAUTION:

If the current release of Communication Manager is 2.0.x, you 

must

 use this 

procedure to back up system, security, and translations data (including AUDIX 
data if IA770 is installed). For these releases, you will restore some or all of the 
backup sets after the upgrade.

To perform a backup, you need an FTP address, directory path, and a user ID and password to 
access an FTP server on the customer’s network. Check with your project manager or the 
customer for this information.

To back up data

1. On the Maintenance Web Interface under Data Backup/Restore, click 

Backup Now

. 

The 

Backup Now

 screen displays.

Tip:

Tip:

Depending on the Communication Manager software version, the following 
screen may look slightly different.

Summary of Contents for G700









































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments