manualshive.com logo in svg

Avaya G700, Installing And Upgrading, Page: 563 / 808

Share
Download
Avaya G700 Installing And Upgrading Download Page 563

Preparing for the upgrade to R4.0 on-site

Issue 10.2 May 2007

563

 

IA770 Messaging Application screen

I

3. Note the 

System Announcements

 language files listed. 

In this example, 

us-eng

 and 

us-tdd

 are listed. If Latin-Spanish (

lat-span

) and Canadian 

French (

french-c

) are listed, ask if these will be used with the release 4.0 system. If any 

other language files are listed, you will need to download the additional language files from 
a language CD after the upgrade.

Checking for any IA770 custom announcement sets (R2.0 only)

When you restore announcement sets, Communication Manager looks for standard names for 
the announcement sets. Therefore, if a custom announcement set exists, check with the 
customer to ensure that the customer wants to restore it. If the set is to be restored, you must 
change the name of the set to a standard name, either 

us-eng

 or 

us-tdd

.

Summary of Contents for G700









































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments