manualshive.com logo in svg

Avaya G700, Installing And Upgrading, Page: 417 / 808

Share
Download
Avaya G700 Installing And Upgrading Download Page 417

Install the S8300

Issue 10.2 May 2007

417

 

Remastering the hard drive and installing the software

To do before you start the upgrade

1. Verify that the S8300 is inserted in slot V1.

2. Verify good AC power connections to the G700.

3. Avaya recommends using a UPS backup for media servers.

If a UPS is present, make sure the G700 is plugged into the UPS.

4. Verify that all Ethernet connections are secure, to ensure the file transfer process is not 

interrupted.

To begin the upgrade

1. Click 

Start > Run

 to open the 

Run

 dialog box.

2. Type 

telnet 192.11.13.6

 and press 

Enter

. 

The

 

first RP screen appears.

The first RP screen

I

Tip:

Tip:

To navigate on these screens, use the arrow keys to move to an option, then 
press the space bar to select the option. Press 

Enter

 to submit the screen.

Note:

Note:

At this point, the installation script looks for the software CD on the DVD/CD drive 
connected to the USB port. If the DVD/CD drive was not attached to a USB port 
when the S8300 booted, you will not see any activity on the screen. In this case, 
perform the following steps:

- Press the Shut Down button on the S8300 Media Server.

- When the OK-to-remove light comes on, connect the DVD/CD-ROM drive to a USB 

port and reseat the S8300 in its slot.

Summary of Contents for G700









































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments