manualshive.com logo in svg

Avaya G700, Installing And Upgrading, Page: 412 / 808

Share
Download
Avaya G700 Installing And Upgrading Download Page 412

Manual installation of a new G700 with an S8300

412 Installing and Upgrading the Avaya G700 Media Gateway and Avaya S8300 Media Server

 

5. Click on the service pack file name for this release. 

For example, 

b.rpm.

6. Click on 

Save

 and browse to the location on your laptop where you want to save the file.

Obtaining Optional language files

Optional languages are any language other than English (

us-eng

 or 

us-tdd)

. If optional 

languages will be used with this IA770, you can also download the appropriate language files 
from the Download Web site. 

1. Follow the steps as in 

Obtaining an IA770 service pack file

on page 411. 

2. At step 

4

, select 

IA 770 INTUITY AUDIX Embedded Messaging Application Languages. 

Obtaining Ethernet interface IP address and subnet mask

If IA770 Integrated Messaging is to be installed, you must obtain an IP address and subnet 
mask to be used for the Ethernet interface for the H.323 integration. The subnet mask must be 
the same as that used for the media server (control network), and is entered on the Configure 
Server Web screen when you configure the S8300.

Completing the RFA process 
(Obtaining license and password file)

Every S8300 media server and local survivable processor (LSP) requires a current and correct 
version of a license file in order to provide the expected call-processing service. 

The license file specifies the features and services that are available on the S8300 media 
server, such as the number of ports purchased. The license file contains a software version 
number, hardware serial number, expiration date, and feature mask. The license file is 
reinstalled to add or remove call-processing features. New license files may be required when 
upgrade software is installed. 

The Avaya authentication file contains the logins and passwords to access the S8300 media 
server. This file is updated regularly by Avaya services personnel, if the customer has a 
maintenance contract. All access to Communication Manager from any login is blocked unless 
a valid authentication file is present on the S8300 media server. 

A new license file and the Avaya authentication file may be installed independently of each 
other or any other server upgrades.

Note:

Note:

For an upgrade, you do not normally need to install a new authentication file (with 
a .pwd extension). However, if one is required, follow the same steps as with a 
license file.

Summary of Contents for G700









































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments