Telephones and adjunct systems
366 Installing and Upgrading the Avaya G700 Media Gateway and Avaya S8300 Media Server
●
Host:
leave blank or enter S8300 Media Server IP Address
●
Remote Port:
0
●
Local Port:
must match the value of Remote Port on the IP Services screen of the
Communication Manager software
6. Press
ENTER
and select
Save & Exit
to effect the changes.
7. Press
ENTER
again to view the
Administration Menu
.
8. Select
kill
to disable the port connection.
9. Repeat the steps for each additional port you want to administer.
10. When administration is complete, from the
Connections Menu
, select
logout
(or press
Ctrl D
).
11. Close HyperTerminal.
At this point, you have established a connection path from the adjunct through the IOLAN+ to
the S8300 Media Server.
Testing connectivity through the IOLAN+
To test connectivity through the IOLAN+
1. On the system management terminal, press
ENTER
to get the login prompt to the
Communication Manager switch.
Note:
Note:
If you get garbled text, check the baud rate setting on the
Port Setup Menu
. You
can adjust it up or down.
2. If no login prompt appears, log back into the IOLAN+ through HyperTerminal.
3. Select
Admin mode > stats
and press
ENTER
twice.
4. Select
users
and press
ENTER
.
Summary of Contents for G700
Page 38: ...38 Installing and Upgrading the Avaya G700 Media Gateway and Avaya S8300 Media Server ...
Page 404: ...404 Installing and Upgrading the Avaya G700 Media Gateway and Avaya S8300 Media Server ...
Page 808: ...808 Installing and Upgrading the Avaya G700 Media Gateway and Avaya S8300 Media Server Index ...