manualshive.com logo in svg

Avaya G700, Installing And Upgrading, Page: 275 / 808

Share
Download
Avaya G700 Installing And Upgrading Download Page 275

On-site Preparation for the Upgrade

Issue 10.2 May 2007

275

 

Copying authentication files to the LSPs

The Upgrade Tool cannot install authentication files. Therefore, copy the authentication files to a 
computer that can connect to the customer’s network. From that same computer, log into the 
Web pages for each LSP and use the Download Files screen to download the authentication file 
(see 

Copying Files to the S8300 hard drive

on page 273).

Copying the Communication Manager software and media
gateway firmware to a TFTP or HTTP server 

If you want to remotely copy Communication Manager software to LSPs 

without 

physically 

inserting the CD-ROM into the CD-ROM drive of each LSP, you must post the software on the 
TFTP or HTTP server you set up earlier. To post the software, use whatever tools are available 
in the customer’s network for file transfer. 

If there are media gateway firmware files that you are installing that are more recent than those 
on the Software CD-ROM, post these individual files on a TFTP server. This TFTP server can 
be the /tftpboot directory of an S8300 Media Server.

Copying the Communication Manager software and media
gateway firmware to the server

Normally, during an upgrade of the primary controller, you will have the Communication 
Manager Software Distribution CD-ROM that contains the latest software to install. The latest 
software for the S8300 has a file name that reflects the most recent load of software (

For 

example only

, 013-01.0.640.1). The latest service pack software for Communication Manager 

also reflects the most recent load of software (

for example only

, 03.1-01.0.640.0).

These files also contain the most recent firmware for the G700 Media Gateway, the various 
media modules, and the P330 Stack Processor.

Preparing LSPs

If you are upgrading any LSPs using the Upgrade Tool from the primary controller, you must 
copy the Communication Manager software to the LSP itself before running the upgrade. You 
can copy the files from any of the following:

●

The CD-ROM

●

A TFTP server. See 

Setting up a TFTP server or HTTP server for LSP software download, 

if desired

on page 259.

●

An HTTP server using a URL. See 

Setting up a TFTP server or HTTP server for LSP 

software download, if desired

on page 259.

Summary of Contents for G700









































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments