manualshive.com logo in svg

Avaya G700, Installing And Upgrading, Page: 272 / 808

Share
Download
Avaya G700 Installing And Upgrading Download Page 272

Upgrading an existing S8300B or S8300C to R4.0 using the Upgrade Tool

272 Installing and Upgrading the Avaya G700 Media Gateway and Avaya S8300 Media Server

 

Copying the service pack files to the media server (starting from 
R2.x only)

Note:

Note:

Do not perform this task if you are upgrading an R3.0 release to R4.0.

To copy service pack files to the media server from the laptop

1. On the Maintenance Web Interface, under Miscellaneous, click 

Download Files

.

2. Select the download method, “Files to download from the machine I’m using to connect to 

the server.”

Note:

Note:

Do not

 select the checkbox, “Install this file on the local server.”

3. Browse to the directory on the laptop that contains the pre-upgrade and post-upgrade 

service pack files.

4. Select the service pack files and click 

Download

.

Installing the pre-upgrade software service pack (starting from 
R2.x only)

Note:

Note:

Do not perform this task if you are upgrading an R3.0 release to R4.0.

A pre-upgrade service pack is required to modify the server upgrade tools, including the web 
Interface and upgrade scripts, which will enable the upgrade to Communication Manager 4.0 to 
complete successfully. LSPs with R2.x software also require the pre-upgrade service pack.

To install the pre-upgrade service pack

1. On the Welcome page of the Communication Manager Web pages, select 

Launch 

Upgrade Tool

.

The Upgrade Tool Welcome page appears.

2. Select 

Schedule Upgrade

 from the menu on the left pane.

The Schedule Upgrade page appears.

3. Enter the file name of the pre-upgrade software service pack in the 

Update File Name

 field 

for the 

Main Server(s)

.

4. Enter the file name of the pre-upgrade software service pack in the 

Update File Name

 field 

for 

LSP

.

Summary of Contents for G700









































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments